ClarkDietrich PIPE-PATCH 3/4" HOLE (100 count) 2-7/8" x 2-7/8" (3/4" diameter hole) (box of 100)
ClarkDietrich PIPE-PATCH 3/4" HOLE (100 count) 2-7/8" x 2-7/8" (3/4" diameter hole) (box of 100)
Product Description
Pipe-Patch is a copper pipe patch pre-cut to fit 1/2" and 3/4" copper pipes (see model name). The material used to manufacture Pipe-Patch will not fuzz-up during sanding. Installation: 1- Begin by lightly sanding the area to be repaired. 2- Apply a layer of drywall compound, measuring between 1/8” to 1/4" thick, directly onto the back of the patch. 3- Position the patch directly over the center of the repair and press it flat against the wall using a joint knife. 4- Immediately apply a skim-coat of compound over the patch and allow it to dry. 5- Once the first coat is dry, apply a second coat and allow it to dry completely before sanding. 6- The compound remaining on the backside of Pipe-Patch adds rigidity to the repaired area. Note: For repairs over painted surfaces, it's recommended to use Strait-Flex Super-Bond mixed with all-purpose joint compound to enhance bondability.
Product Information
- Sold as 100 per box
- Dimensions: 2-7/8" x 2-7/8" (3/4" diameter hole)
- Pre-cut to fit 1/2" and 3/4" copper pipes (see model name).
- Great for fire taping.
- Pipe-Patch repairs and reinforces mis-cut drywall.