Simpson TITEN HD 5/8 X 6-1/2 316SS 6-1/2" x 5/8" (carton of 10)

Product Description

The Stainless-Steel Titen HD screw anchor series is designed for use in both cracked and uncracked concrete, as well as uncracked masonry. This series of anchor provides outstanding performance with low installation torque. This anchor series is intended for a wide variety of applications like seating, post bases, ledgers, sill plates, and other holdown applications. This anchor type is easy to remove when used in temporary applications such as bracing and formwork, or to allow for the relocation of a fixture. Note: This anchor is made with type 316 stainless steel for applications in extreme environments with salt water, chemicals, or corrosive solutions. See versions manufactured with 304 stainless steel for corrosion resistance that is suitable for use in less extreme environments where the area may be wet, moist, or damp. Installation: Drill a hole in the base material concrete or masonry using a carbide drill bit that is the same diameter as the nominal diameter of the anchor to be installed. Drill the hole deep enough past embedment depth to allow thread tapping dust to settle inside hole. See manufacturer published overdrill depth table if needed. Blow dust clean. Insert anchor through fixture and into hole. Tighten anchor until the hex-washer head makes contact with the fixture.

Product Information

• Sold as 10 per carton
• Dimensions: 6-1/2" x 5/8"
• 316 stainless steel for applications in extreme environments with salt water, chemicals, or corrosive solutions.
• Qualified for static, wind, and seismic loading conditions.
• Thread design undercuts for efficient load transfer to base material.
• Special heat treatment provides cutting tip hardness without compromising ductility.
• Use with standard drill bit: designed to install with ANSI tolerance drill bits.
• Hex-washer head does not require a separate washer unless required by code in some applications.
• Available in many standard fractional sizes.

Additional Resources

Link to manufacturer website.

Link to submittals.

Link to collection.